A.
期刊論文
1. K.C. Cheng, J.J. Chen, W.
Y. Chiu, L. Wang and P.C. Wang (2005) “Rate Enhancement for Nitroxide
Stable Free Radical Polymerization of n-Butyl Acrylate by Dodecylbenzenesulfonic
Acid,” J. Polym. Sci. Polym. Chem., 43, 42.
2. C.F. Lee, H.H. Tsai, C.F.
Chen, L. Wang, and W.Y. Chiu (2005) “Synthesis and Properties of Silica/Polystyrene/Polyaniline
Conductive Composite Particles,” J. Polym. Sci. Polym. Chem., 43, 342.
3. S.P. Rwei, H.Y. Lee, S.D.
Yoo, L. Wang and J.G. Lin (2005) “Magnetorheological characteristics
of aqueous suspension that contains Fe3O4 nanoparticles,” Colloid and
Polymer Sci., 283, 1253.
4. C.C. Chu, Y.W. Wang, L. Wang
and T.I. Ho (2005) “Synthesis and characterization of novel conductive
star polymers containing PSS/PANI arms,” Synth. Met., 153, 321.
5. K.H. Hsu, J.H. Wu, Y.Y. Huang,
L. Wang, H.Y. Lee and J.G. Lin (2005) “Critical size effects on the
magnetic resonance in Fe3O4 nanoparticles,” J. Appl. Phys., 97, 114322.
6. C.C. Chu, L. Wang and T.I.
Ho (2005) “Novel C60-Anchored two-armed poly(tert-butyl acrylate): synthesis
and characterization,” Macromol. Rapid Commun. 26, 1179.
7. C.F. Lee, C.C. Yang, L. Wang
and W.Y. Chiu (2005) “Novel amphiphilic carbon black composite nanoparticles
from TEMPO-terminated polymer and TEMPO-terminated copolymer grafted
carbon black,” Polymer, 46, 5514.
8. Y.J. Lin, L. Wang and W.Y.
Chiu (2005) “Preparation and characterization of titania nanotubes and
hybrid materials derived from them,” J. Vac. Sci. Technol.B, 23, 2398.
9. L. Wang, J.S. Ji, Y.J. Lin
and S.P. Rwei (2005) “Novel poly(3-nonylthiophene)-TiO2 hybrid materials
for photovoltaic cells,” Synth. Met., 155, 677.
10. J.S. Ji, Y.J. Lin, H.P. Lu,
L. Wang and S.P. Rwei (2006) “Synthesis and photoluminescence of poly(3-hexylthiophene)/titania
nanostructured hybrids,” Thin Solid Film, 511, 182.
11. Y.J. Lin, L. Wang and W.Y.
Chiu (2006) “Novel poly(3-methylthiophene)-TiO2 hybrid materials for
photovoltaic cells,” Thin Solid Film, 511, 199.
12. L. Wang, P. Chang and C.L.
Cheng (2006) “Structural effects of pendant groups on thermal and electrical
properties of polyimides,” J. Appl. Polym. Sci., 100, 4672.
13. W.B. Liau, Y.T. Sun, L.Y.
Yang, L. Wang, W.Y. Chiu, K.H. Hsieh and S.M. Tseng (2006) “Morphology
and characterization of conductive films based on polyaniline-coated
polystyrene latexes,” J. Appl. Polym. Sci., 102, 5406.
14. C.C. Chu, T.I. Ho and L.
Wang (2006) “Synthesis and characterization of novel C60-anchored multi-armed
polymers,” Macromolecules, 39, 5657.
15. H.J. Chen, P.C. Jian, J.H.
Chen, L. Wang and W.Y. Chiu (2007) “Nanosized hybrid colloids of poly(acrylic
acid)/ titania prepared via in-situ sol-gel reaction,” Ceramics Int.,
33, 643.
16. C.C. Chu, T.I. Ho and L.
Wang (2007) “Water-soluble electrostatic complexes of C60-anchored anionic
polymers and cationic porphyrins,” Macromol. Rapid Commun., 28, 200.
17. H.J. Chen, L. Wang and W.Y.
Chiu (2007) “Chelation and solvent effect on the preparation of titania
colloids,” Mater. Chem. Phys., 101, 12.
18. Y. Gao, C.C. Wang, L. Wang
and H.L. Wang (2007) “Conjugated polyelectrolytes with pH dependent
conformations and optical properties,” Langmuir, 23, 7760.
19. H.J. Chen, L. Wang and W.Y.
Chiu (2007) “Effects of annealing treatment on the properties of MEH-PPV/
titania hybrids prepared via in situ sol–gel reaction,” Eur. Polym.
J., 43, 4750.
20. S.P. Rwei, and L. Wang (2007)
“Synthesis and electrical, rheological and thermal characterization
of conductive polyurethane,” Colloid and Polymer Sci., 285, 1313.
21. H.J. Chen, L. Wang and W.Y.
Chiu (2008) “Preparation of MEH-PPV/nanosized titania hybrids via in
situ sol-gel reaction of titanium alkoxide: optical property,” J. Polym.
Sci. Polym. Chem., 46, 515.
22. Y.M. Chang, W.F. Su and L.
Wang (2008) “Influence of photo-induced degradation on the optoelectronic
properties of regioregular poly(3-hexylthiophene),” Solar Eng. Mater.
Solar Cells, 92, 761-765.
23. C.W. Hsu, H.R. Liou, W.F.
Su and L. Wang (2008) “Self-assembled monolayers of 2-(thienyl)hexylphosphonic
acid on native oxide surface of silicon fabricated by air-liquid interface-assisted
method,” J. Colloid Interface Sci., 324, 236-239.
24. H.J. Chen, L. Wang, W.Y.
Chiu and T.M. Don (2008) “Synthesis of nanosized PAA/titania hybrid
composites- experiment and modeling,” Ceramics Int., 34, 467-477.
25. Y.M. Chang, W.F. Su and L.
Wang (2008) “Photoactive polythiophene:titania hybrids with excellent
miscibility for use in polymer photovoltaic cells,” Macromol. Rapid
Commun., 29, 1303-1308.
26. C.C. Chu, Y.W.Wang, C.F.
Yeh and L. Wang (2008) “Synthesis of conductive core-shell nanoparticles
based on amphiphilic starburst poly(n-butyl acrylate)-b-poly(styrene
sulfonate),” Macromolecule s, 41, 5632-5640.
27. C.-F. Yeh, C.-H. Chao, K.
Sung and L. Wang (2008) “Conducting polymer composite films with core-shell-like
nanostructure prepared from terthiophene-terminated starburst poly(n-butylacrylate),”
Macromolecules, 41, 6608-6611.
28. H.-J. Chen, L. Wang and W.-Y.
Chiu (2008) “Synthesis and characterization of MEH-PPV/nanosized titania
hybrids prepared via in situ sol–gel reaction,” Mater. Chem. Phys.,
112, 551-556.
29. Y.-M. Chang, L. Wang and
W.-F. Su (2008) “Polymer solar cells with poly(3,4-ethylenedioxythiophene)
as transparent anode,” Org. Electron. 9, 968-973.
30. H.Y. Lee, S.P. Rwei, L. Wang
and P.H. Chen (2008) “Preparation and characterization of core-shell
polyaniline-polystyrene sulfonate@Fe3O4 nanoparticles,” Mater. Chem.
Phys., 112, 805-809.
31. Y.-M. Chang and L. Wang (2008)
“Efficient poly(3-hexylthiophene)-based bulk heterojunction solar cells
fabricated by an annealing-free approach,” J. Phys. Chem. C, 112, 17716-17720.
32. C.-W. Hsu, L. Wang and W.-F.
Su (2009) “Effect of chemical structure of interface modifier of TiO2
on photovoltaic properties of poly(3-hexylthiophene)/TiO2 layered solar
cells,” J. Colloid Interface Sci. 329, 182-187.
TOP